Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #0: Fri May 23 08:24:46 JST 2003
    devin@borosilicate.pun-pun.prv:/usr/obj/usr/src/4-stable/src/sys/BOROSILICATE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x634  Stepping = 4
  Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 536870912 (524288K bytes)
avail memory = 518098944 (505956K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  8, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc042d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 17 -> irq 15
pci0: <PCI bus> on pcib0
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 3.0 irq 2
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 4.0 irq 11
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x6000-0x601f mem 0xc0200000-0xc02fffff,0xc0480000-0xc0480fff irq 15 at device 5.0 on pci0
fxp0: Ethernet address 00:a0:c9:c8:b6:2f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise TX2 ATA100 controller> port 0x6020-0x602f,0x6054-0x6057,0x6048-0x604f,0x6050-0x6053,0x6040-0x6047 mem 0xc0400000-0xc0403fff irq 16 at device 6.0 on pci0
ata2: at 0x6040 on atapci0
ata3: at 0x6048 on atapci0
isab0: <PCI to ISA bridge (vendor=0e11 device=a0f3)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Generic PCI ATA controller> port 0x6030-0x603f,0-0x3,0-0x7,0-0x3,0-0x7 irq 15 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard
IOAPIC #0 intpin 23 -> irq 17
IOAPIC #0 intpin 20 -> irq 18
IOAPIC #0 intpin 21 -> irq 19
pci1: <PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xc0000000-0xc0000fff irq 17 at device 10.0 on pci1
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
tl0: <Compaq Netelligent 10/100 TX UTP> port 0x5400-0x540f mem 0xc0180000-0xc018000f irq 18 at device 11.0 on pci1
tl0: Ethernet address: 00:80:5f:9b:03:c6
miibus1: <MII bus> on tl0
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus1
tlphy0:  10base2/BNC, 10base5/AUI
sym0: <875> port 0x5000-0x50ff mem 0xc0080000-0xc0080fff,0xc0100000-0xc01000ff irq 19 at device 12.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xce7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Vadem 469> at port 0x3e2 iomem 0xd4000 irq 9 on isa0
pcic0: management irq 9
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sbc0: <ESS ES1868> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
pcm0: <ESS 18xx DSP> on sbc0
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0303> can't assign resources
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 20 packets/entry by default
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
ad4: 114473MB <ST3120024A> [232581/16/63] at ata2-master UDMA100
Waiting 3 seconds for SCSI devices to settle
pccard: card inserted, slot 0
(probe5:sym0:0:5:0): phase change 6-7 6@1f14bf8c resid=4.
Mounting root from ufs:/dev/ad4s1a
cd0 at sym0 bus 0 target 5 lun 0
cd0: <COMPAQ CD-ROM CR-503BCQ 1.1c> Removable CD-ROM SCSI-2 device 
cd0: 3.300MB/s transfers
cd0: cd present [312514 x 2048 byte records]