Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4 000: 67 5a 08 ff Attribute memory device information: Device number 1, type SRAM, WPS = OFF Speed = 5.0 x 100 ns, Memory block size = 512b, 2 units Tuple #3, code = 0x1d (Other conditions for attribute memory), length = 5 000: 01 67 5a 08 ff (MWAIT) Tuple #4, code = 0x15 (Version 1 info), length = 80 000: 05 00 4c 75 63 65 6e 74 20 54 65 63 68 6e 6f 6c 010: 6f 67 69 65 73 00 57 61 76 65 4c 41 4e 2f 49 45 020: 45 45 00 56 65 72 73 69 6f 6e 20 30 31 2e 30 31 030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff Version = 5.0, Manuf = [Lucent Technologies], card vers = [WaveLAN/IEEE] Addit. info = [Version 01.01],[] Tuple #5, code = 0x20 (Manufacturer ID), length = 4 000: 56 01 02 00 PCMCIA ID = 0x156, OEM ID = 0x2 Tuple #6, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #7, code = 0x22 (Functional EXT), length = 2 000: 01 07 Network technology: Wireless Tuple #8, code = 0x22 (Functional EXT), length = 5 000: 02 40 42 0f 00 Network speed: 1 Mb/sec Tuple #9, code = 0x22 (Functional EXT), length = 5 000: 02 80 84 1e 00 Network speed: 2 Mb/sec Tuple #10, code = 0x22 (Functional EXT), length = 5 000: 02 60 ec 53 00 Network speed: 5 Mb/sec Tuple #11, code = 0x22 (Functional EXT), length = 5 000: 02 c0 d8 a7 00 Network speed: 11 Mb/sec Tuple #12, code = 0x22 (Functional EXT), length = 2 000: 03 07 Network media: 2.4 GHz Tuple #13, code = 0x22 (Functional EXT), length = 8 000: 04 06 00 02 2d 2b ab 06 Network node ID: 00 02 2d 2b ab 06 Tuple #14, code = 0x22 (Functional EXT), length = 2 000: 05 01 Network connector: closed connector standard Tuple #15, code = 0x1a (Configuration map), length = 7 000: 03 01 e0 03 00 00 01 Reg len = 4, config register addr = 0x3e0, last config = 0x1 Registers: X------- Tuple #16, code = 0x1b (Configuration entry), length = 15 000: c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Minimum operating supply voltage: 4 x 1V, ext = 0x4b Maximum operating supply voltage: 5 x 1V, ext = 0x19 Max current average over 1 second: 3 x 100mA Max current average over 10 ms: 3 x 100mA Power down supply current: 1 x 10mA Card decodes 6 address lines, limited 8/16 Bit I/O IRQ modes: Level, Pulse IRQs: NMI IOCK BERR VEND 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #17, code = 0xff (Terminator), length = 0 2 slots found